Jungle Voodoo
Supplies needed
This tutorial is written for psp XD-11-EdMironiuk-voodoo Tube used Artwork of © Ed Mironiuk
His License can be purchased C.I.L.M
Font of choice I used Lindsay Triangles
Plug-in MuRa's Meister Copies
ButterflyFlutterbyJungleFeverTemplate at my Blog
BflyFlbyMask17 Mask featured in my Template is available on my blog
PTU Kit Jungle Fever by Soxsational scraps can be purchased from designerscrapslivinlarge, berryblissscrapz, and angelicscraps.
Open ButterflyFlutterbyJungleFeverTemplate
Open TWJF-Paper11
Select BflyFlbyMask17 on template > selections > select all > selections > float > selections > de-float
Select TWJF-Paper11 > edit > copy > back to template > right click > Paste > paste into selection
Selections > select none > X-Out BflyFlbyMask17 layer in layer palette > by click icon that looks like an eye
Open TWJF-Paper1 > edit > copy
Select Fat Lines layer on template selections > select all > selections > float > selections > de-float >
Select pan tool > right click > Paste > paste into selection > Selections > select none
Select label 1
Open TWJF-Paper2 > edit > copy
Select Thin Lines layer on template selections > select all > selections > float > selections > de-float >
++++Select pan tool > right click > Paste > paste into selection > Selections > select none
Select magic wand tool > settings below
Select > Top Fill Layer on template Click inside with magic wand > right click on template > paste > paste into selection
Select magic wand tool > Bottom Fill > pan tool > right click on template > paste > paste into selection > selections > select none
Select freehand selection tool> use settings below
Select Label 1 on template > selections > select all > selections > float > selections > de-float > Select pan tool > right click > Paste > paste into selection > Selections > select none
Select label 2 and repeat step above
Open TWJF-Grass2 > edit > copy > select pan tool > select template > right click and paste as new layer > Position grass so its level with bottom of fat lines layer
Move layer to just below Label 1 Shadow layer in layer palette
Open > TWJF-Flowerswirl4 > edit > copy > select Thin Lines layer on template > Paste as new layer > positioning of flower see below
Right click on flower in layer palette > duplicate > move duplicated layer in layer palette to above layer named Top Backplate Shadow > position flower see pic above
Select > TWJF-Flowerswirl4 > Draw around the outside of the bottom Leaf > see pic below
Draw around leaf click with right click of mouse at each stop when you want to go in a different direction > when back to the beginning left click on mouse clicker when back to start position > and it should now of become Anti-Alias
Open a new layer mines set to a default of 600 by 600
Select TWJF-Flowerswirl4 layer > pan tool > edit > copy > paste as new layer
You should now have our piece of the flower leaf on a separate image layer
Plug-in, MuRa's Meister Copies > copies > preset menu cards > settings below
Your Leaf should now have turned it below
Select pan tool > edit copy your new created leaf pattern > select > Top Fill on template layer > paste as new layer
Don’t close original leaf pattern we need it later this next bit might seem confusing but ive added a screen shot of all the procedures so you can see where to position all the leaf pattern layers, or just mess around with your own variations
Right click on our leaf pattern layer in layer palette > duplicate > move to and position top right corner
Right click on the duplicated leaf pattern layer again > image mirror > position top left corner
Open TWJF-Cat3 > image > resize by 70 > edit > copy > paste as new layer > just above our leaf pattern
Position cat so that his back leg is just hidden by Top Backplate
Select our original leaf pattern we made on the new layer > edit copy paste above cat layer so that it looks like the cat is poking out between the leaves
Hopefully your template looks like this now
Select magic wand settings we used earlier > select Top Backplate layer > click inside so it becomes Anti-alias
Selections > modify > expand by 3 > selections > invert
Now select each grass layer as u select each one individually Hit the delete key on your keyboard > and all the excess leaf pattern outside the Top Backplate should be removed
Now select cat layer in layer palette > hit delete key on keyboard and the excess will be removed once everything is removed
Selections > select none > your template should now look like this
Are your still with me I hope so as we are going to do this again for Bottom Fill > select Bottom Fill layer in layer palette
Now go back to our original created leaf pattern on separate sheet > edit > copy > paste as new layer > Image > flip > mirror
Open TWJF-Zebra > image > resize by 60 > edit > copy > paste as new layer > position so his tail is just at edge of Bottom Fill see pic below
Right click on Leaf pattern Layer we just added > duplicate
Image < mirror > position top right corner >see below pic
Go back to our original created leaf pattern layer > edit > copy > paste as new layer
Image > mirror > position bottom left corner > so some of the leafs just covering his nose
Right click on this layer in layer palette > duplicate > image > mirror > position bottom right corner
Select magic wand settings we used earlier > select Bottom Backplate layer > click inside so it becomes Anti-alias
Selections > modify > expand by 3 > selections > invert
Now select each grass layer as u select each one individually Hit the delete key on your keyboard > and all the excess leaf pattern outside the Bottom Backplate should be removed
Now select cat layer in layer palette > hit delete key on keyboard and the excess will be removed once everything is removed
Selections > select none > your template should now look like this
Open TWJF-Toocan > image > resize by 40 > edit > copy > paste as new layer > position Toocan so it’s sitting on top left corner of Bottom Backplate
Effects > 3d effects > drop shadow > settings below
Raster deform tool > select the Toocan drop shadow layer and move slightly to the right > see finished tag
Repeat this step adding a drop shadow to the Zebra and Cat layers
To give them depth >see finished tag for positioning of shadows
Go back to our originally created leaf pattern I promise this is the last time well use it
Edit > copy > paste as new layer > position bottom left corner of our template > you can now close this leaf pattern new image layer
Open TWJF-Giraffe > image > resize by 80 > edit > copy > paste as new layer position far left of template see finished tag
Open TWJF-Snake > image > resize by 30 > edit > copy > paste as new layer
Effects > 3d effects > drop shadow > settings used earlier
Raster deform tool > position shadow a little to the right > see finished tag
Set background colour to black > font > Lindsay Triangles > size 60 > click on template> type Jungle > click apply > grab arm in centre and rotate a little an place over label 1 > right click > convert to raster layer
Text tool > type Voodoo > apply > twist a little and position over label 2 right click and covert to raster layer
Click text tool again and type your name > right click and convert to raster layer > see finished tag for positioning
Open D-11-EdMironiuk-voodoo if using same tube as me > image resize by 90 > edit > copy > paste as new layer > position to the left on your template
Right click on tube layer in layer palette > duplicate > image > mirror
Now this is the tricky part > raster deform tool > move tube so its position that’s the knuckles line up and his toes do too
If the tag is too big for your likening > image > resize by 85 > make sure > all layers is ticked
Text tool > font of choice > size 10 > add Copyright information > your name if you like > © Ed Mironiuk > CILM license number > www.edmironiuk.com
If using tag in a PG rated group you may leave off his website URL
Open animation shop
Hide duplicated tube layer > right click on template > copy merged > go to animation shop > edit > paste > as new animation
Go back to psp > unhide duplicated tube layer > hide original tube layer
Right click on template > copy merged > back to animation shop > select arrow tool > right click on our tag > paste > paste after animation
Edit > select all > animation > frame properties > change to 55
When happy file save and where done
This Tutorial is ©Butterflyflutterby...03/11/2008
Please do not copy or remove without permission I’m a new Tutorial writer so any comments would be appreciated
Butterflyflutterby
Please don’t reproduce of display this is any yahoo group msn group or on the web without asking my permission
Registered with TWI.